vehicle

375: Bugatti Royale

| wonko

I am not normally a fan of fiddly modular figurative models, preferring geometrics instead but this design by Halle caught my eye:

Made from 41 tiny bits of paper, various sizes and fold techniques, it turns into a 3d jigsaw from hell near the end. Amazingly however it all slots together (although I needed to use a little double-sided tape to stop it from popping apart again due to paper tension).

You can see radiator, bonnet, wheels with hubcaps, mudguards, cockpit and canopy – amazing really.

I like that it is an attempt at a fairly faithful rendering of a real car – car geeks agree it looks a lot like the actual model and my rendition, first fold, is a lot like it should have turned out.

The ingenious system of interlocking cubes, half cubes and trays that slide inside each other is a masterpiece of design. Scale and accuracy is a problem and I fear copy paper is the wrong material because it wants to unfold – I guess something like tissue foil would be better because once folded it stays put. I have done another Halle model – the computer guy for Chris the computer guy and it too was a lot of different bits of paper assembled later.

359: Santa Claus is Coming to Town

| wonko

You better watch out. You better not cry
Better not pout, I’m telling you why
Santa Claus is coming to town.
He’s making a list. And checking it twice;
Gonna find out Who’s naughty and nice
Santa Claus is coming to town

This is a David Brill tableau, scaled down to teeny weeny because … well, because … because I could? I have a packet of shiny small origami paper so used that for the micro-reindeer – they sort of determined the scale for the remainder of the figures.

There is much to like about this festive scene – The sleigh is full of water bombs (the perfect summer gift), Santa sits, the reindeer seem animated and Rudolph has a lovely red nose, courtesy of a suggestion from “she who must be obeyed” to use a glass headed pin – good call.

I hope this post finds you enjoying family, fun and festive cheer. Our Christmas Origami display is as you see it here – most of these models are available for you in the auction house for a limited time only.

297: Taxi!

| wonko

In old Chinatown, when someone wanted to travel in style, they hailed a “coolie” pulling a rickshaw:

This picture was common in days gone by, these days the hustle and bustle of bicycles, motorbikes and tuk-tuks has replaced the hard work.

This is Neal Elias’ “Coolie and Rickshaw”, designed in1967. An ingenious box pleat using a square and tidily fashioning a running man and a 2 wheeled buggy behind, replete with lovely conical hat, wheels and canopy.

I have been wanting to try this for a while, just because really. Taken from “Selected works 1964-1973” by British Origami Society. I am happy with this as a first fold. I modified the body and legs a little to add a sense of movement, and re-worked the wheels so they were round (the original design had them nearly square).

295: WALL-E

| wonko

I am an out and proud Pixar fan, they make movies where animation is almost amazing as the story telling and characterisation:

This is Brian Chan’s WALL-E – a lovely model that has taken me simply an age to complete for all sorts of reasons.

I started with a 52cm square (yep, over a half a meter) and a dodgy folding guide (as opposed to complete diagrams) in RUSSIAN and quite frankly I struggled with this one. I must find a way to buy a book that has this model in it, to see how Brian Chan suggests you fold it because I ended up improvising when there were no instructions that I could follow.

I walked away from this model 3 times, unfolded and re-folded the most complex parts a total of 4 times as I tried to make sense of the next stage. That said, I think the final model is quite remarkable. He is free standing (on stunning caterpillar tracks), has the most amazing head/eyes, is just under 10cm tall and I am totally chuffed with how he turned out.

That you can coax a square of paper into such an intricate and completely detailed model is nothing short of amazing – even if it did take me 5.5 HOURS – yes, that is actual folding elapsed time. Words fail me to express the delight when I finally realised he was going to work (having seriously contemplating abandoning the model twice).

This, for me, is a REAL achievement given how much I had to just work out for myself. Folded from my last piece of lithographic paper (thank you school art department). There was NO paper fatigue and that is astonishing given the lengths that the design requires you torture the paper. I must have some more.

263: Enterprise (Micro Machine)

| wonko

Those who know me know that I am a bit of a trekker, always on the lookout for Star Trek related stuff:

When I saw this simple model I knew I would give it a go some day. Tonight my mate Mike and I watch some retro Trek (Original Series) and I thought it opportune to roll out the micromachine version – not sure if you remember the concept – there was a sort of “matchbox” to that was tiny versions of other things – this looks a lot like the micro machine version of the enterprise.

At this scale it was very fiddly indeed – tiny little folds in a very dense mid-section, but it figuratively represents the model so I am happy enough with it. If I were to fold it again I wold start with a much bigger sheet of paper.

Cute saucer-section, nacelles in more or less the right place, I even fashioned a deflector dish in the right place – cute if torturous.

Space, the final frontier, these are the voyages of the starship Enterprise …