One of many issues with long-term storage/display is the nature of the material itself – paper.

Most origami paper is not acid-free, meaning that over time the colours change as oxidation and UV damage take their toll on what is essentially a fragile material. Moisture and humidity conspire to “unfold” folded paper, causing it to want to return to the flat state, unless wet-shaping has been used to change the “memory” of the sheet fiber orientation.

Many models are not self-standing, so stands or other tricks are necessary to allow them to present upright – I have used both plastic clip stands and more permanent wire armature bases.

For the presentation/display model of Sampreet Manna’s beautiful new Peacock, I have used a few techniques to stabilise it in readying it for display (September – December I typically have display cases of my work in Suburban libraries).

This model is top-heavy – although the legs are pretty life-size in terms of the body proportions, they are spindly and the claws are not wide-spread enough for the model to self-support. I took some heavy gauge anodised aluminium armature wire, covered it with paper offcut from the sheet I was working with (“Earth” Tapa Duong Vietnamese fiber paper from @oritube_master ‘s shop) using PVA glue. Covering the wire with paper first makes adherence to the main model much more securely.

Once the wire segments had dried I then buried them deep in the pleats that made up the legs, closing the layers as I did using PVA glue dabs and then clamping it all in place whit it dried. The result is now that the model is help up by the leg wires, allowing me to permanently pose the “knees and ankles” without compromising the model stability.

Additionally, adding small PVA glue dots inside seams stops them from opening back up and greatly contributes to the long-term stability of the pose. I do not think this is as “cheaty” as bathing the model in MC and wet-sculpting it, like many origamists do. I have employed wet hands while shaping as a more gentle (and authentic) wet-folding technique and indeed some of the nice organic smooth curves achieved on this model were done that way. By wetting the paper, positioning it and then letting it dry the more subtle shapes become permanent,

The base this time was a white plastic lid from an empty container that was being recycled. I covered it with hand-made Kozo/cotton/day lily blend paper I made a few years ago – a lovely contrast that was interesting but not too busy as to distract from the already visually striking paper the model is folded from. Selecting a suitable base – be it a round lid or a plinth made from foam core can greatly enhance the stability of the model and give it a “finished” look.

The wires are punched through the top of the lid, bent tightly underneath and held with layers of gaffer tape and self-adhesive foam-core to make it feel “solid” and stable.

I am really happy with this piece, another model I am happy to display.